JINGCHENG GLASS,13 Years For Building Glass Production
Product Description
Insulated glass/Hollow glass/Double glazing glass is made of two or more pieces of glass sheets and use sealant gumming glass piece and aluminum spacers which was filled with desiccant together. Insulated glass/ Hollow glass/Double glazing glass with the perimeter of the spacer that gets in contact with the glass is properly sealed with primary and secondary sealants to ensure it is air tight.
Choosing insulated glass/hollow glass/double glazing glass, not only could get a brilliant indoor environment and meet the requirements of the fashion and style, but also could reduce the cost of energy power. This kind of IG unit can enhance a window's thermal insulation up to 3 times resulting in reduction of energy consumption of up to 75% compared to a single glazed unit.
Insulated glass/Hollow glass/IGU/Double glazing glass performance characteristics:
l. Thermal insulation: with low heat gain and heat loss value (low U value)
2. Light transmission: appropriate level of solar transmission and solar reflectance can be selected to meet the design and functional requirement.
3. Noise insulation: insulated glass/hollow glass/double glazing glass, can reduce noise level by 30 dB. With inert gas in-filled, a 5 dB further reduction can be achieved.
4. Condensing prevention: The insulated glass/hollow glass/double glazing glass units are designed to withstand down to -65°C without condensing, far exceeding the National Requirement of -40°C.
5. Leakproof: to ensure the insulated glass/hollow glass/double glazing glass, air tight, automatic bending machine is used for all four corners bending, with use of linear connector for the spacer. A dual seal system is adopted with PIB as primary seal, and silicone or polysulfide as secondary seal. We use advanced fully automatic IG production line from Lisec of Austria, with automatic production operations covering spacer bending, filling of desiccant, edge deletion of coated glass, glass assembly, filling with inert gas and application of primary and secondary sealants.
Insulated Glass`s Types
Made of Float Glass, Tempered Glass, Laminated Galss, Pattern Glass, etc.
Low E glass (Low Emissivity) provides excellent performance in situations where temperature separation is desired. Low-E is used to help meet energy efficiency requirements by blocking UV light and providing heat insulation. This is done with a special thin-film metallic or oxide coating which prevents the passage of short-wave solar energy into a building and also prevents long-wave energy produced by heating systems and lighting from escaping outside.
Low-e Insulating Glass:
It is made by 2pcs or more float glasses which filled with desiccant of Argon gas with Aluminum frame. Primary seal(butyl)between glass and Aliminum frame, secondry seal(polysulfide or structure). The insulated glass will be effectively protect radiation when coated Low-E film.
Size avaliable:
5mm+0.76pvb+5mm+12A+5mm
5mm+1.14pvb+5mm+12A+5mm
5mm+9A+5mm+9A+5mm
5mm+9A+5mm+9A+5mm low-e
4mm+9A+4mm+9A+4mm
5mm+0.76pvb+5mm+12A+5mm low-e
could be produced as per request.
Color avaliable
Glass color clear,bronze, grey, green etc.
Pvb color clear,milk,bronze,grey etc
Packing conditions :
packing in wooden crates with paper between each sheet
HOT-SALE PROUCTS
Our company established since 2003. We earn a good branding in China and start exporting to many countries after 2005. Our leading products included tempered glasses, laminated glasses and lowe glasses. We have more than 13 year of exporting experience. We concentrate in details of our products. You should give us a chance to serve you, then you will understand why our client will work with us for many years and do not leave us.
FAQ
Q:What kinds of glass can you provide?
A:laminated glass,tempered glass,insulating glass and low-e glass etc.
Q: What is your minimum order quantity?
A:Our MOQ is one 20 feet container (20-27Tons).We can also do LCL orders.
Q: How can I get samples to check your qulity?
A:We offer samples for free. ALL YOU HAVE TO DO IS ASK!
Q:Can you do OEM Orders?
A:Yes,we hire technicians to design your products as per your specific needs.
Q:What is your trade Term?
A:FOB,CFR,CIF,EXW.
Q:What is your payment term?
A:T/T,L/C, Credit 30-90days.
Q:What is your delivery time?
A:15-30 days,depend on the order quantity.
Product Description
Insulated glass/Hollow glass/Double glazing glass is made of two or more pieces of glass sheets and use sealant gumming glass piece and aluminum spacers which was filled with desiccant together. Insulated glass/ Hollow glass/Double glazing glass with the perimeter of the spacer that gets in contact with the glass is properly sealed with primary and secondary sealants to ensure it is air tight.
Choosing insulated glass/hollow glass/double glazing glass, not only could get a brilliant indoor environment and meet the requirements of the fashion and style, but also could reduce the cost of energy power. This kind of IG unit can enhance a window's thermal insulation up to 3 times resulting in reduction of energy consumption of up to 75% compared to a single glazed unit.
Insulated glass/Hollow glass/IGU/Double glazing glass performance characteristics:
l. Thermal insulation: with low heat gain and heat loss value (low U value)
2. Light transmission: appropriate level of solar transmission and solar reflectance can be selected to meet the design and functional requirement.
3. Noise insulation: insulated glass/hollow glass/double glazing glass, can reduce noise level by 30 dB. With inert gas in-filled, a 5 dB further reduction can be achieved.
4. Condensing prevention: The insulated glass/hollow glass/double glazing glass units are designed to withstand down to -65°C without condensing, far exceeding the National Requirement of -40°C.
5. Leakproof: to ensure the insulated glass/hollow glass/double glazing glass, air tight, automatic bending machine is used for all four corners bending, with use of linear connector for the spacer. A dual seal system is adopted with PIB as primary seal, and silicone or polysulfide as secondary seal. We use advanced fully automatic IG production line from Lisec of Austria, with automatic production operations covering spacer bending, filling of desiccant, edge deletion of coated glass, glass assembly, filling with inert gas and application of primary and secondary sealants.
Insulated Glass`s Types
Made of Float Glass, Tempered Glass, Laminated Galss, Pattern Glass, etc.
Low E glass (Low Emissivity) provides excellent performance in situations where temperature separation is desired. Low-E is used to help meet energy efficiency requirements by blocking UV light and providing heat insulation. This is done with a special thin-film metallic or oxide coating which prevents the passage of short-wave solar energy into a building and also prevents long-wave energy produced by heating systems and lighting from escaping outside.
Low-e Insulating Glass:
It is made by 2pcs or more float glasses which filled with desiccant of Argon gas with Aluminum frame. Primary seal(butyl)between glass and Aliminum frame, secondry seal(polysulfide or structure). The insulated glass will be effectively protect radiation when coated Low-E film.
Size avaliable:
5mm+0.76pvb+5mm+12A+5mm
5mm+1.14pvb+5mm+12A+5mm
5mm+9A+5mm+9A+5mm
5mm+9A+5mm+9A+5mm low-e
4mm+9A+4mm+9A+4mm
5mm+0.76pvb+5mm+12A+5mm low-e
could be produced as per request.
Color avaliable
Glass color clear,bronze, grey, green etc.
Pvb color clear,milk,bronze,grey etc
Packing conditions :
packing in wooden crates with paper between each sheet
HOT-SALE PROUCTS
| Glass Type | Tempered glass / Toughened glass |
| Color | Clear / Ultra-clear / Green / Grey / Bronze / Blue etc. |
| Maximum Size | 2440*6500mm |
| Minimum Size | 200*300mm |
| Thickness | Tempered:4-19mm half tempered :4-12mm |
| Glass Type | Insulated glass |
| Maximum Size | 2500*5000mm |
| Minimum Size | 200*300mm |
| Thickness | 3-19mm |
| Spacer Thickness | 6mm, 9mm, 12mm, 15mm, 16mm, 20mm |
| Regular Size | 5+9A+5 5+9A+5 low-e 5+9A+5 coated 5+12A+5 5+12A+5 low-e 5+12A+5 coated 5+16A+5 5+16A+5 low-e 5+16A+5 coated 5+20A+5 5+20A+5 low-e 5+20A+5 coated 5+24A+5 5+24A+5 low-e 5+24A+5 coated 6+12A+6 6+16A+6 low-e 6+12A+6 coated 6+24A+6 6+24A+6 low-e 6+24A+6 coated 5+12A+5+12A+5 5+12A+5+12A+5 low-e |
| Glass Type | Laminated glass |
| Maximum Size | 2500*7800mm |
| Thickness | 3-19mm |
| Total Thickness | 6.38-80mm |
| PVB | 0.38-2.28mm (0.38mm, 0.76mm, 1.14mm, 1.52mm ) |
| Arch height< 50mm for curved laminated glass | |
| Regular Size | 5+0.38pvb+5 tempered or not 5+0.76pvb+5 6+0.38pvb+6 tempered or not 6+0.76pvb+6 6+1.14pvb+6 tempered or not 8+0.76pvb+8 5+9A+5+9A+5 5+9A+5+9A+5 low-e 5+12A+5+12A+5 5+12A+5+12A+5 low-e 5+0.76pvb+5+9A+5 5+0.76pvb+5+9A+5 low-e 5+0.76pvb+5+12A+5 5+0.76pvb+5+12A+5 low-e 5+1.14pvb+5+9A+5 5+1.14pvb+5+9A+5 low-e 4+9A+4+9A+4 |
| Glass Type | Low-E glass |
| Low-E Types | On line Low-E Glass Off line Low-E Glass Double Silver Low-E Glass Curved Tempered Low-E Glass |
| Maximum Size | 2440*3660mm |
| Minimum Size | 300*700mm |
| Thickness | 3-19mm |
| Popular Size | 2134*3050mm 2440*3050mm 2134*3300mm 2440*3300mm 2134*3660mm 2440*3660mm |
| Glass Type | Online reflective coated glass |
| Color | Silvery grey, grey, blue grey, blue, lake blue, grayish green, |
| Green, bluish green, golden, tawny, champagne, etc. | |
| Maximum Size | 2440*7200mm |
| Minimum Size | 350*600mm |
| Thickness | 3, 4, 5, 6, 8, 10, 12, 15mm |
| Packing | Safe Plywood cases and interlayer paper between glass |
| Lead Time | On time delivery |
| Whether u request one container or a bulk shipment,we also attaches great importance to the details in every order,do a good job in each shipment. | |
Our company established since 2003. We earn a good branding in China and start exporting to many countries after 2005. Our leading products included tempered glasses, laminated glasses and lowe glasses. We have more than 13 year of exporting experience. We concentrate in details of our products. You should give us a chance to serve you, then you will understand why our client will work with us for many years and do not leave us.
FAQ
Q:What kinds of glass can you provide?
A:laminated glass,tempered glass,insulating glass and low-e glass etc.
Q: What is your minimum order quantity?
A:Our MOQ is one 20 feet container (20-27Tons).We can also do LCL orders.
Q: How can I get samples to check your qulity?
A:We offer samples for free. ALL YOU HAVE TO DO IS ASK!
Q:Can you do OEM Orders?
A:Yes,we hire technicians to design your products as per your specific needs.
Q:What is your trade Term?
A:FOB,CFR,CIF,EXW.
Q:What is your payment term?
A:T/T,L/C, Credit 30-90days.
Q:What is your delivery time?
A:15-30 days,depend on the order quantity.